Products
PTP aluminum
foil
Alu Alu Foil
Tropical
Blister Foils
AL/PE Strip
Foil
Composite film
Paper Aluminum Foil
Suppository Packing |
Tropical Blister Foils
General description
Tropical blister foil is a
combination of thermoformed plastic blisters and cold formed
composite aluminum foil; blister packing can keep the blister
dimension consistent, the area around the blister is slightly wider
so that the cold-formed tropical blister composite film can be
sealed with the thermoformed blister, such can offset the
disadvantage of non-block light and poor water resistance in
traditional aluminum plastic packaging, and tropical blister foil is
gradually accepted by domestic pharmaceutical manufacturers.
Tropical blister foil consists of nylon,
aluminum and adhesive, and in fact, tropical blister foil is a sheet
of material combined of above three raw materials through special
equipment in a certain temperature and pressure, and tropical
blister foil is designed to improve barrier properties in
traditional aluminum-plastic packaging. Only add aluminum-plastic
composite film cover on the PVC blister back, and then a tropical
blister aluminum packaging can be formed
Tropical blister foils is used to pack
medicine with high value, tropical blister foils consist of
Alu foil, Nylon, and Alu foil, and tropical blister foils is used to
cover PVC packing to protect medicine.
Detailed Description
Typical Structure
of tropical blister foil is
OPA/AL/VC
Product Features
The product can prevent moisture, obstructing oxygen, light, and
can effectively prevent gas, other media components to damage
drugs to maximum and can extend itself life, particularly, can
be adapted in the tropical areas.
PVC is used to be sealing.
High strength of mechanical property, good formability, and high
strength heat sealing, such can be suitable for high-speed
packaging machine. Tropical blister is a creative and improved
approach for packaging of PVC blister, seal laminates against
PVC blister to bring tropical blister. It has good barrier
performance, and can protect against vapor, oxygen, UV rays,
such is more economical than Cold formed foil and superior
compared with sachet packaging though almost in the same cost.
Meanwhile, your enterprise information and trademark can be
shown in the flat laminates.
General
technical data of tropical blister foil is as follows:
Common configuration |
NY25/AL60/VC |
NY25/AL65/VC |
Grams per square meter |
201 |
215 |
Mix proportion with PVC and PTP |
3.4:5.8:1 |
3.6:5.8:1 |
Application scope |
Deep blister |
Shallow blister |
|
Technical
data of tropical blister foil offered by Hanlin is as follows:
Thickness |
90-115mic |
Alloy |
8021 |
Type |
roll |
Treatment |
composited |
Temper |
soft |
Width |
60-600mm |
ID |
76mm or 152mm |
Certification |
SGS/ISO/CFDA/DMF |
Structure |
OPA/AL/VC |
|
Hanlin Tropical
blister foil product
|
Tropical blister foil configuration
|
When customer asks inquiry
for tropical blister foil, he has to offer us width of
tropical blister foil, and whether the
tropical blister foil
shall be printed or not. We
are willing to offer customers
tropical blister foil
sample without
charge for his test, if customers test machine is bought from China,
we are willing to send the asked sample to the test machine
manufacture.
|